HF Vehicle Radio Package (Codan)

HF – Codan Envoy X1 Mobile station

Envoy X1 mobile configuration is a package that includes all materials for installation of a mobile Codan radio station in one vehicle.

Procurement locations:  This model may be available locally, but if not, then source regionally and/or through HQ.  Alternate models should be considered only with consultation of IT department and CRS’ global emergency team (HRD).

Manufacturer link:  http://www.codanradio.com/product/envoy/

Shipping and cost details:

Item	Packaging	Weight	Dimensions	Volume	Cost
HF Vehicle Radio Package	2 cartons	19 kg total	1) 51 x 34 x 30cm2) 170 x 22 x 18 cm	123L total	$4,500

Specifications:

Frequency Range	1.6-30 MHz
Channels	100
Power input	12 Volts DC
Power Output	125 Watts
Modes	USB/LSB/AM/ Ethernet
Call types	Emergency, selective, phone, message, morse

Components (Hyperlink):

• Codan NGT SRx RF transceiver unit
• NGT SRx handset microphone and cradle
• External speaker with mounting bracket and 4m cable
• NGT control cable, 6m
• Installation kit, hardware, fuses, cables and connectors
• Auto tuning antenna main assembly with riser and spring
• 9350 to NGT control cable, 6m
• Fiberglass whip, 1.6m
• Steel whip, 1.2m

Notes:

• Basic voice communications are compatible with many HF radios, such as Icom, JRC, Kenwood and Yaesu. The Selcall system is compatible with most Codan, Q-Mac and Barrett models.
• Frequencies and options are programmed via the RS232 socket using NSP software (see options) and a computer. Can be programmed manually.

Options:

The items below may be purchased in addition to the kit above. These are necessary items if CP has no programming software or interface cables:

NVIS antenna kit	Improves HF communication in the 0-500km, 2-12Mhz range
NSP NGT System Programmer CD	Necessary software for setting up system
NSP Programming Interface Cable	Necessary for programming new system

HF – Codan Envoy X1 Base Station

Envoy X1 base station configuration is a package that includes all materials for installation of a mobile Codan radio station in one vehicle.

Procurement location:  This model may be available locally, but if not, then source regionally and/or through HQ. Alternate models should be considered only with consultation of IT department and HRD.

Manufacturer link:  http://www.codanradio.com/product/envoy/

Item	Packaging	Weight	Dimensions	Volume	Cost
HF Radio Base Station	2 cartons	1) 11kg2) 9kg	1) 51 x 34 x 30cm2) 143 x 17 x 17 cm	93L total	$4,000

Specifications:

Frequency Range	1.6-30 MHz
Channels	100
Power Output	125 Watts
Power input	12 Volts DC
Modes	USB/LSB/AM/ Ethernet

Components (Hyperlink)

Notes:

• The Envoy base station is supplied by default with the 34m length version of the 411 broadband dipole antenna. Based on space available to set up antenna a 27m length version can be ordered instead (part number 15-00411-005) or a 43m length version (part number 15-00411-003) .
• Frequencies and options are programmed via the RS232 socket using TPS 3250 software and a computer.
• Can be programmed manually by suitably qualified person.
• Data transmission is possible when the optional Radio, HF, Data Modem is used.
• Antenna requires a minimum of 30m mast spacing. Comes with inverted V mounting arm.

Options:

Programming software and interface cables are necessary for installation. Necessary if the country program does not already have them.

TPS 3250 System Programmer CD	Necessary software for setting up system
NSP Programming Interface Cable	Necessary for programming new system
Adaptor USB to DB9 Serial Port	Adapt to connect to computer with no serial port
Lightning Protection: Coaxial Cable, 30m Lightning Arrestor Copper Earth Strip, 50mm x 0.46mm, per metre Earth Stake	Necessary to protect from lightening
Backup Battery Cable